Kanzda’s Egg tray washing machine is used in egg industry enterprises and egg farms. It is suitable for washing, sterilization, stacking, and drying a large batch of 30 egg trays. The products can be customized and processed according to egg trays.
The washing machine can quickly clean and process the egg tray, remove the dirt on the tray, and realize the sterilization of the tray through the solution (chlorine solution, etc.), the whole machine only needs one person to operate, which can save Labor. At the same time, the cleaning water is recycled, saving water.
In the daily life cycle, the egg tray becomes very dirty. The feather, egg skin, and damaged egg liquid are all the objects to be cleaned on the egg tray, especially the egg liquid will become hard after drying, and the two contact trays are not easy to separate. Kanzda’s Egg tray washing machine has a powerful automatic tray distribution system, which can divide the stacked Egg tray into each part for cleaning.
Standard features of the Kanzda egg tray washing machine are:
- Powerful driving force supply: BWM-ET70 Tray washing machine is equipped with 304 stainless steel pump with large flow, and the cleaning process reaches three levels, design the spray system according to the specifications of the egg tray, and spray the tray in all directions without dead corners.
- With the transmission system and guide rail which are completely consistent with the tray, the tray will not turn over even if it works for a long time.
- Equipped with two sets of water remover, 95% of the water on the tray can be removed.
- Smart filtration system with the extended screen surface, matched with the nozzle diameter, to prevent clogging.
- Extra brushes for dirty trays
- Siemens inverter control operation
- Omron photoelectric switch, accurate measurement.
- Water tank automatic heating system.
- Automatic disinfectant system.
- Kanzda produces different voltage washers
suitable for different countries and regions.
For example: 415V / 380V / 440V / 230V
Release tray (30 pieces): manually place piles of egg trays on the feeding part of the washer. Pay attention to the direction of the egg trays when placing them, and a prompt will be given at the feeding end of the equipment.
2. Automatic splitting: the egg tray is split into a single one by itself and put materials to the conveying part by itself, and the conveying device drives it to move to the cleaning and processing station.
3. washing station 1: it is recommended to add a cleaning agent into the water tank for the first-level cleaning station, and heating cleaning water is needed.
4. washing station 2: This station is mainly responsible for the dust removal from the egg tray and can add disinfectant into the water tank to remove the peculiar smell on the egg tray.
5. Clean water flushing: clean the surface of the egg tray again with a set of clean water (tap water). The water in this station is discharged directly and is optional. If you choose to open it according to the situation, you can turn off the watering.
6. Blower #1: a large amount of free water on the surface of the egg tray is removed by a large air volume fan.
7. Blower #2: remove water from the egg tray again to improve the drying degree.
8. Automatic Collection (30 pieces): The egg tray is piled by itself and transported to the main conveyor belt after reaching a certain amount.
9. Return: the processed egg tray will be sent back to the feeding end by the conveyor belt, and will be placed regularly by the operator.
BWM-ET70 the operation of the Tray washing machine is friendly, and the operation panel is located on the right side of the feeding end so that it can be operated conveniently. The two channels of the Tray washer are controlled separately. If one line stops working, the other channel will continue to operate, which means production will be maintained.
